The TF16A series uses a low-profile mechanical interlock for hose-to-fitting joints with limited installation clearance. Three corrugations in the band flex under circumferential tension to accommodate assembly tolerances and temperature-related diameter changes within the validated range. During installation, the tensioning hooks draw the band ends together until the load-retaining hook fully engages.
The stainless steel band is 10.0 mm wide and 0.8 mm thick. Nominal closed inside diameters span 40.0–120.5 mm. Refer to the part drawing for dimensions and material grade. Figure 1 shows the as-delivered and locked states, the tensioning hooks, the load-retaining hook and the installed rotational envelope diameter (RD).
Figure 1 Three-Wave Clamp As Delivered and Locked
Seat the hose on the fitting and measure the assembled outside diameter (OD) at the clamping location. Use the as-delivered diameter to check installation clearance and the nominal closed inside diameter to shortlist parts. In trial builds, account for hose hardness, wall thickness and operating temperature. At minimum OD, verify compression and sealing or retention. At maximum OD, confirm full hook engagement and check corrugation deflection and tool closing force against approved limits.
Position the clamp in the specified clamping zone and seat the matched pincer jaws on the two tensioning hooks. Use the validated tool settings to draw the band ends together until the closure feature at the overlap fully engages the load-retaining hook. Release the tool and confirm that the hook remains seated.
For a geometric estimate of diameter reduction, divide the effective decrease in circumference by π. Corrugation extension and hose compression affect the actual reduction. Verify tool closing travel, actual diameter reduction and allowable compensation separately on the actual assembly.
Check clamp position, inspect the overlap for misalignment or lifting, and examine all three corrugations for abnormal deformation. Verify sealing or axial pull-off resistance on the complete assembly as required. If the clamp rotates with the assembly, check the installed RD about the actual axis of rotation. Include the projecting corrugations and interlock, and verify minimum running clearance to adjacent parts.
Specify the TF16A part number, quantity, nominal closed inside diameter, assembly OD limits and operating temperature. For rotating applications, include the maximum permitted installed envelope. Include a drawing with the inquiry for any specific material, dimensional tolerance or compensation requirements.
Band width × thickness 10.0 × 0.8 mm. Listed in TOWIN part number order.
| Part number | As-delivered Ø(mm) | Nominal closed ID(mm) | Part number | As-delivered Ø(mm) | Nominal closed ID(mm) |
| TF16A0001 | 44.5 | 40.0 | TF16A0028 | 51.5 | 47.0 |
| TF16A0002 | 62.5 | 58.0 | TF16A0029 | 52.0 | 47.5 |
| TF16A0003 | 45.0 | 40.5 | TF16A0030 | 52.5 | 48.0 |
| TF16A0004 | 63.0 | 58.5 | TF16A0031 | 53.0 | 48.5 |
| TF16A0005 | 45.5 | 41.0 | TF16A0032 | 53.5 | 49.0 |
| TF16A0006 | 63.5 | 59.0 | TF16A0033 | 54.0 | 49.5 |
| TF16A0007 | 46.0 | 41.5 | TF16A0034 | 54.5 | 50.0 |
| TF16A0008 | 64.0 | 59.5 | TF16A0035 | 55.0 | 50.5 |
| TF16A0009 | 46.5 | 42.0 | TF16A0036 | 55.5 | 51.0 |
| TF16A0010 | 64.5 | 60.0 | TF16A0037 | 56.0 | 51.5 |
| TF16A0011 | 47.0 | 42.5 | TF16A0038 | 56.5 | 52.0 |
| TF16A0012 | 65.0 | 60.5 | TF16A0039 | 57.0 | 52.5 |
| TF16A0013 | 47.5 | 43.0 | TF16A0040 | 57.5 | 53.0 |
| TF16A0014 | 65.5 | 61.0 | TF16A0041 | 58.0 | 53.5 |
| TF16A0015 | 48.0 | 43.5 | TF16A0042 | 58.5 | 54.0 |
| TF16A0016 | 66.0 | 61.5 | TF16A0043 | 59.0 | 54.5 |
| TF16A0017 | 48.5 | 44.0 | TF16A0044 | 59.5 | 55.0 |
| TF16A0018 | 66.5 | 62.0 | TF16A0045 | 60.0 | 55.5 |
| TF16A0019 | 49.0 | 44.5 | TF16A0046 | 60.5 | 56.0 |
| TF16A0020 | 67.0 | 62.5 | TF16A0047 | 61.0 | 56.5 |
| TF16A0021 | 49.5 | 45.0 | TF16A0048 | 61.5 | 57.0 |
| TF16A0022 | 67.5 | 63.0 | TF16A0049 | 62.0 | 57.5 |
| TF16A0023 | 50.0 | 45.5 | TF16A0050 | 69.0 | 64.5 |
| TF16A0024 | 68.0 | 63.5 | TF16A0051 | 88.0 | 83.5 |
| TF16A0025 | 50.5 | 46.0 | TF16A0052 | 107.0 | 102.5 |
| TF16A0026 | 68.5 | 64.0 | TF16A0053 | 69.5 | 65.0 |
| TF16A0027 | 51.0 | 46.5 | TF16A0054 | 88.5 | 84.0 |
TF16A Part Number Specifications
Band width × thickness 10.0 × 0.8 mm. Listed in TOWIN part number order.
| Part number | As-delivered Ø(mm) | Nominal closed ID(mm) | Part number | As-delivered Ø(mm) | Nominal closed ID(mm) |
| TF16A0055 | 107.5 | 103.0 | TF16A0082 | 112.0 | 107.5 |
| TF16A0056 | 70.0 | 65.5 | TF16A0083 | 74.5 | 70.0 |
| TF16A0057 | 89.0 | 84.5 | TF16A0084 | 93.5 | 89.0 |
| TF16A0058 | 108.0 | 103.5 | TF16A0085 | 112.5 | 108.0 |
| TF16A0059 | 70.5 | 66.0 | TF16A0086 | 75.0 | 70.5 |
| TF16A0060 | 89.5 | 85.0 | TF16A0087 | 94.0 | 89.5 |
| TF16A0061 | 108.5 | 104.0 | TF16A0088 | 113.0 | 108.5 |
| TF16A0062 | 71.0 | 66.5 | TF16A0089 | 75.5 | 71.0 |
| TF16A0063 | 90.0 | 85.5 | TF16A0090 | 94.5 | 90.0 |
| TF16A0064 | 109.0 | 104.5 | TF16A0091 | 113.5 | 109.0 |
| TF16A0065 | 71.5 | 67.0 | TF16A0092 | 76.0 | 71.5 |
| TF16A0066 | 90.5 | 86.0 | TF16A0093 | 95.0 | 90.5 |
| TF16A0067 | 109.5 | 105.0 | TF16A0094 | 114.0 | 109.5 |
| TF16A0068 | 72.0 | 67.5 | TF16A0095 | 76.5 | 72.0 |
| TF16A0069 | 91.0 | 86.5 | TF16A0096 | 95.5 | 91.0 |
| TF16A0070 | 110.0 | 105.5 | TF16A0097 | 114.5 | 110.0 |
| TF16A0071 | 72.5 | 68.0 | TF16A0098 | 77.0 | 72.5 |
| TF16A0072 | 91.5 | 87.0 | TF16A0099 | 96.0 | 91.5 |
| TF16A0073 | 110.5 | 106.0 | TF16A0100 | 115.0 | 110.5 |
| TF16A0074 | 73.0 | 68.5 | TF16A0101 | 77.5 | 73.0 |
| TF16A0075 | 92.0 | 87.5 | TF16A0102 | 96.5 | 92.0 |
| TF16A0076 | 111.0 | 106.5 | TF16A0103 | 115.5 | 111.0 |
| TF16A0077 | 73.5 | 69.0 | TF16A0104 | 78.0 | 73.5 |
| TF16A0078 | 92.5 | 88.0 | TF16A0105 | 97.0 | 92.5 |
| TF16A0079 | 111.5 | 107.0 | TF16A0106 | 116.0 | 111.5 |
| TF16A0080 | 74.0 | 69.5 | TF16A0107 | 78.5 | 74.0 |
| TF16A0081 | 93.0 | 88.5 | TF16A0108 | 97.5 | 93.0 |
TF16A Part Number Specifications
Band width × thickness 10.0 × 0.8 mm. Listed in TOWIN part number order.
| Part number | As-delivered Ø(mm) | Nominal closed ID(mm) | Part number | As-delivered Ø(mm) | Nominal closed ID(mm) |
| TF16A0109 | 116.5 | 112.0 | TF16A0136 | 121.0 | 116.5 |
| TF16A0110 | 79.0 | 74.5 | TF16A0137 | 83.5 | 79.0 |
| TF16A0111 | 98.0 | 93.5 | TF16A0138 | 102.5 | 98.0 |
| TF16A0112 | 117.0 | 112.5 | TF16A0139 | 121.5 | 117.0 |
| TF16A0113 | 79.5 | 75.0 | TF16A0140 | 84.0 | 79.5 |
| TF16A0114 | 98.5 | 94.0 | TF16A0141 | 103.0 | 98.5 |
| TF16A0115 | 117.5 | 113.0 | TF16A0142 | 122.0 | 117.5 |
| TF16A0116 | 80.0 | 75.5 | TF16A0143 | 84.5 | 80.0 |
| TF16A0117 | 99.0 | 94.5 | TF16A0144 | 103.5 | 99.0 |
| TF16A0118 | 118.0 | 113.5 | TF16A0145 | 122.5 | 118.0 |
| TF16A0119 | 80.5 | 76.0 | TF16A0146 | 85.0 | 80.5 |
| TF16A0120 | 99.5 | 95.0 | TF16A0147 | 104.0 | 99.5 |
| TF16A0121 | 118.5 | 114.0 | TF16A0148 | 123.0 | 118.5 |
| TF16A0122 | 81.0 | 76.5 | TF16A0149 | 85.5 | 81.0 |
| TF16A0123 | 100.0 | 95.5 | TF16A0150 | 104.5 | 100.0 |
| TF16A0124 | 119.0 | 114.5 | TF16A0151 | 123.5 | 119.0 |
| TF16A0125 | 81.5 | 77.0 | TF16A0152 | 86.0 | 81.5 |
| TF16A0126 | 100.5 | 96.0 | TF16A0153 | 105.0 | 100.5 |
| TF16A0127 | 119.5 | 115.0 | TF16A0154 | 124.0 | 119.5 |
| TF16A0128 | 82.0 | 77.5 | TF16A0155 | 86.5 | 82.0 |
| TF16A0129 | 101.0 | 96.5 | TF16A0156 | 105.5 | 101.0 |
| TF16A0130 | 120.0 | 115.5 | TF16A0157 | 124.5 | 120.0 |
| TF16A0131 | 82.5 | 78.0 | TF16A0158 | 87.0 | 82.5 |
| TF16A0132 | 101.5 | 97.0 | TF16A0159 | 106.0 | 101.5 |
| TF16A0133 | 120.5 | 116.0 | TF16A0160 | 125.0 | 120.5 |
| TF16A0134 | 83.0 | 78.5 | TF16A0161 | 87.5 | 83.0 |
| TF16A0135 | 102.0 | 97.5 | TF16A0162 | 106.5 | 102.0 |
You can get a price or send us any questions to get any information you would like to know, and we will reply to you as soon as possible.