Search

Welded Housing British-Style Clamp

This British-type hose clamp combines a spot-welded housing with a non-perforated band. A worm screw tightens the clamp around the hose joint. The housing attachment carries load during tightening. Check the clamping range, installation clearance, and condition of the attachment area.

Descriptions

Construction and Operating Principle

The housing is attached to the band by spot welding and supports the worm screw. Turning the screw engages the formed band thread and draws the band through the housing. Refer to the part drawing for weld layout and component geometry.

 

Band Contact Surface and Applications

The non-perforated band provides a continuous inner contact surface at the clamping location. Candidate applications include automotive coolant lines, heater hoses, and general equipment hose joints. Assess hose material, wall thickness, hardness, fluid, operating pressure, temperature, and vibration.

 

Sizing and Component Materials

Seat the hose to the specified depth and check both assembled outside-diameter tolerance limits against the selected part’s clamping range. Select a band that fits fully on the clamping land and check clearance at the housing and band tail. Confirm the band, housing, and screw materials and finishes by part number.

 

Installation and Tightening Torque

Seat the clamp squarely on the designated clamping land and locate it relative to the fitting bead as shown on the drawing. Orient the screw for full driver or socket engagement and tighten to the torque approved for the part and assembly. Recheck the torque setting when fastener material, finish, or lubrication changes.

 

Inspection and Joint Validation

After installation, inspect the housing attachment for cracks, lifting, or displacement and verify proper screw engagement. Check band position and inspect the hose for cuts or excessive extrusion. Before production, trial-fit assemblies at both outside-diameter tolerance limits and verify sealing, pull-off resistance, or performance after thermal cycling as required.

 

Ordering Information

Provide the Towin part number or specify the clamping range, band width, spot-welded housing configuration, component materials, screw head, and quantity. For new applications, include hose and fitting drawings, tool approach, available clearance, and service conditions.

Menu

Get a Quick Quote

You can get a price or send us any questions to get any information you would like to know, and we will reply to you as soon as possible.

Update cookies preferences