This German-type worm-drive hose clamp combines screw adjustment with an elastic compensation element for joints exposed to temperature changes or hose relaxation. Installation establishes the initial clamping load and spring preload. Within its working travel, the element deflects with changes in joint diameter to help maintain contact pressure between the hose and fitting.
The main components are the band, housing, worm screw, and elastic compensation element. Tightening the screw draws the band tight and stores elastic energy in the element. As the hose contracts on cooling or relaxes under sustained compression, the element can recover within its working travel. Allow sufficient deflection for hot expansion. Confirm the element’s configuration and position on the part drawing.
Candidate applications include automotive coolant, heater, and charge-air hose joints subject to thermal cycling. Review hose material, hardness, wall thickness, fluid, and temperature range. Confirm materials and finishes for the band, housing, screw, and compensation element by part number, considering exposure to road splash, moisture, and salt.
Seat the hose to the specified depth and determine the assembled outside diameter and tolerance limits at the clamping location. Check the part’s clamping range, band width, and tool clearance. After trial installation, verify the compensation element’s working position and available travel for cold contraction and hot expansion. Include hose compression behavior and fitting stiffness in joint validation.
Seat the full band width squarely on the supported clamping land. Tighten with a matching driver bit or socket to the installation torque approved for the part and assembly. Inspect the compensation element as specified on the drawing. Installation torque controls the assembly process. Actual clamping load also depends on thread friction, hose compression, and the characteristics of the compensation element.
Check band position, screw engagement, compensation element seating, and hose condition. Before production, trial-fit assemblies at both outside-diameter tolerance limits and verify leakage and retention under the specified temperature, pressure, and cycling conditions. Include vibration or axial loading where required by the application.
Provide the Towin part number or the assembled outside-diameter limits, band width, component material requirements, and quantity. For new applications, include hose and fitting drawings, cold and hot temperatures, operating pressure, fluid, and installation clearance to support specification review and trial assembly.
You can get a price or send us any questions to get any information you would like to know, and we will reply to you as soon as possible.