The screw-type double-wire hose clamp secures a hose to a fitting by tightening two parallel wire turns. Select the clamp by the assembled outside diameter at the clamping location and verify that both turns fit on the supported clamping land.
The clamp consists of formed double-turn wire, a tightening screw, and closure hardware. Turning the screw draws the wire turns tight, creating two narrow contact zones around the hose. Check the screw head and closure dimensions on the part drawing for tool access and installation clearance.
Candidate applications include ventilation and drain hose connections in vehicles and industrial equipment. On wire- or helix-reinforced hoses, trial-fit the clamp and check for stable seating, wire turns riding on a raised rib, skew, or hose damage. Confirm materials and finishes for the wire, screw, washer, and closure plate by part number.
Seat the hose to the specified depth and measure the assembled outside diameter at the clamping location. Check both tolerance limits against the part’s clamping range. Review wire diameter, axial spacing between turns, screw dimensions, and clearance at the closure. Trial-fit thin-wall or soft hoses and check for local indentation and distortion.
Position both wire turns parallel to each other on the specified clamping land. Check that the turns are uncrossed and the closure is aligned. Tighten the screw using the specified tool and assembly procedure. Where a torque is specified, apply the value approved for that part number and hose assembly.
Check wire seating, thread engagement, and the hose for cuts or excessive deformation. Before production, trial-fit assemblies at both outside-diameter tolerance limits and verify sealing, pull-off resistance, or joint condition after vibration testing as required by the application.
Provide the Towin part number or specify the assembled outside-diameter limits, hose construction, wire diameter or material requirements, available clearance, and quantity. For new applications, include hose and fitting drawings along with the service fluid, temperature, and pressure.
You can get a price or send us any questions to get any information you would like to know, and we will reply to you as soon as possible.