Search

Earless Clamp with 3-Wave Tolerance Compensation

The TF16A series uses a low-profile mechanical interlock for hose-to-fitting joints with limited installation clearance. Three corrugations in the band flex under circumferential tension to accommodate assembly tolerances and temperature-related diameter changes within the validated range. During installation, the tensioning hooks draw the band ends together until the load-retaining hook fully engages.

Descriptions

Design and Series Specifications

The stainless steel band is 10.0 mm wide and 0.8 mm thick. Nominal closed inside diameters span 40.0–120.5 mm. Refer to the part drawing for dimensions and material grade. Figure 1 shows the as-delivered and locked states, the tensioning hooks, the load-retaining hook and the installed rotational envelope diameter (RD).

Figure 1  Three-Wave Clamp As Delivered and Locked

 

Sizing and Validation at Assembly Limits

Seat the hose on the fitting and measure the assembled outside diameter (OD) at the clamping location. Use the as-delivered diameter to check installation clearance and the nominal closed inside diameter to shortlist parts. In trial builds, account for hose hardness, wall thickness and operating temperature. At minimum OD, verify compression and sealing or retention. At maximum OD, confirm full hook engagement and check corrugation deflection and tool closing force against approved limits.

 

Tensioning Hooks and Interlock Installation

Position the clamp in the specified clamping zone and seat the matched pincer jaws on the two tensioning hooks. Use the validated tool settings to draw the band ends together until the closure feature at the overlap fully engages the load-retaining hook. Release the tool and confirm that the hook remains seated.

 

Closing Travel and Allowable Compensation

For a geometric estimate of diameter reduction, divide the effective decrease in circumference by π. Corrugation extension and hose compression affect the actual reduction. Verify tool closing travel, actual diameter reduction and allowable compensation separately on the actual assembly.

 

Inspection and Rotational Clearance

Check clamp position, inspect the overlap for misalignment or lifting, and examine all three corrugations for abnormal deformation. Verify sealing or axial pull-off resistance on the complete assembly as required. If the clamp rotates with the assembly, check the installed RD about the actual axis of rotation. Include the projecting corrugations and interlock, and verify minimum running clearance to adjacent parts.

 

Ordering Information

Specify the TF16A part number, quantity, nominal closed inside diameter, assembly OD limits and operating temperature. For rotating applications, include the maximum permitted installed envelope. Include a drawing with the inquiry for any specific material, dimensional tolerance or compensation requirements.

 

TF16A Part Number Specifications

Band width × thickness 10.0 × 0.8 mm. Listed in TOWIN part number order.

Part number As-delivered Ø(mm) Nominal closed ID(mm) Part number As-delivered Ø(mm) Nominal closed ID(mm)
TF16A0001 44.5 40.0 TF16A0028 51.5 47.0
TF16A0002 62.5 58.0 TF16A0029 52.0 47.5
TF16A0003 45.0 40.5 TF16A0030 52.5 48.0
TF16A0004 63.0 58.5 TF16A0031 53.0 48.5
TF16A0005 45.5 41.0 TF16A0032 53.5 49.0
TF16A0006 63.5 59.0 TF16A0033 54.0 49.5
TF16A0007 46.0 41.5 TF16A0034 54.5 50.0
TF16A0008 64.0 59.5 TF16A0035 55.0 50.5
TF16A0009 46.5 42.0 TF16A0036 55.5 51.0
TF16A0010 64.5 60.0 TF16A0037 56.0 51.5
TF16A0011 47.0 42.5 TF16A0038 56.5 52.0
TF16A0012 65.0 60.5 TF16A0039 57.0 52.5
TF16A0013 47.5 43.0 TF16A0040 57.5 53.0
TF16A0014 65.5 61.0 TF16A0041 58.0 53.5
TF16A0015 48.0 43.5 TF16A0042 58.5 54.0
TF16A0016 66.0 61.5 TF16A0043 59.0 54.5
TF16A0017 48.5 44.0 TF16A0044 59.5 55.0
TF16A0018 66.5 62.0 TF16A0045 60.0 55.5
TF16A0019 49.0 44.5 TF16A0046 60.5 56.0
TF16A0020 67.0 62.5 TF16A0047 61.0 56.5
TF16A0021 49.5 45.0 TF16A0048 61.5 57.0
TF16A0022 67.5 63.0 TF16A0049 62.0 57.5
TF16A0023 50.0 45.5 TF16A0050 69.0 64.5
TF16A0024 68.0 63.5 TF16A0051 88.0 83.5
TF16A0025 50.5 46.0 TF16A0052 107.0 102.5
TF16A0026 68.5 64.0 TF16A0053 69.5 65.0
TF16A0027 51.0 46.5 TF16A0054 88.5 84.0

TF16A Part Number Specifications

Band width × thickness 10.0 × 0.8 mm. Listed in TOWIN part number order.

Part number As-delivered Ø(mm) Nominal closed ID(mm) Part number As-delivered Ø(mm) Nominal closed ID(mm)
TF16A0055 107.5 103.0 TF16A0082 112.0 107.5
TF16A0056 70.0 65.5 TF16A0083 74.5 70.0
TF16A0057 89.0 84.5 TF16A0084 93.5 89.0
TF16A0058 108.0 103.5 TF16A0085 112.5 108.0
TF16A0059 70.5 66.0 TF16A0086 75.0 70.5
TF16A0060 89.5 85.0 TF16A0087 94.0 89.5
TF16A0061 108.5 104.0 TF16A0088 113.0 108.5
TF16A0062 71.0 66.5 TF16A0089 75.5 71.0
TF16A0063 90.0 85.5 TF16A0090 94.5 90.0
TF16A0064 109.0 104.5 TF16A0091 113.5 109.0
TF16A0065 71.5 67.0 TF16A0092 76.0 71.5
TF16A0066 90.5 86.0 TF16A0093 95.0 90.5
TF16A0067 109.5 105.0 TF16A0094 114.0 109.5
TF16A0068 72.0 67.5 TF16A0095 76.5 72.0
TF16A0069 91.0 86.5 TF16A0096 95.5 91.0
TF16A0070 110.0 105.5 TF16A0097 114.5 110.0
TF16A0071 72.5 68.0 TF16A0098 77.0 72.5
TF16A0072 91.5 87.0 TF16A0099 96.0 91.5
TF16A0073 110.5 106.0 TF16A0100 115.0 110.5
TF16A0074 73.0 68.5 TF16A0101 77.5 73.0
TF16A0075 92.0 87.5 TF16A0102 96.5 92.0
TF16A0076 111.0 106.5 TF16A0103 115.5 111.0
TF16A0077 73.5 69.0 TF16A0104 78.0 73.5
TF16A0078 92.5 88.0 TF16A0105 97.0 92.5
TF16A0079 111.5 107.0 TF16A0106 116.0 111.5
TF16A0080 74.0 69.5 TF16A0107 78.5 74.0
TF16A0081 93.0 88.5 TF16A0108 97.5 93.0

TF16A Part Number Specifications

Band width × thickness 10.0 × 0.8 mm. Listed in TOWIN part number order.

Part number As-delivered Ø(mm) Nominal closed ID(mm) Part number As-delivered Ø(mm) Nominal closed ID(mm)
TF16A0109 116.5 112.0 TF16A0136 121.0 116.5
TF16A0110 79.0 74.5 TF16A0137 83.5 79.0
TF16A0111 98.0 93.5 TF16A0138 102.5 98.0
TF16A0112 117.0 112.5 TF16A0139 121.5 117.0
TF16A0113 79.5 75.0 TF16A0140 84.0 79.5
TF16A0114 98.5 94.0 TF16A0141 103.0 98.5
TF16A0115 117.5 113.0 TF16A0142 122.0 117.5
TF16A0116 80.0 75.5 TF16A0143 84.5 80.0
TF16A0117 99.0 94.5 TF16A0144 103.5 99.0
TF16A0118 118.0 113.5 TF16A0145 122.5 118.0
TF16A0119 80.5 76.0 TF16A0146 85.0 80.5
TF16A0120 99.5 95.0 TF16A0147 104.0 99.5
TF16A0121 118.5 114.0 TF16A0148 123.0 118.5
TF16A0122 81.0 76.5 TF16A0149 85.5 81.0
TF16A0123 100.0 95.5 TF16A0150 104.5 100.0
TF16A0124 119.0 114.5 TF16A0151 123.5 119.0
TF16A0125 81.5 77.0 TF16A0152 86.0 81.5
TF16A0126 100.5 96.0 TF16A0153 105.0 100.5
TF16A0127 119.5 115.0 TF16A0154 124.0 119.5
TF16A0128 82.0 77.5 TF16A0155 86.5 82.0
TF16A0129 101.0 96.5 TF16A0156 105.5 101.0
TF16A0130 120.0 115.5 TF16A0157 124.5 120.0
TF16A0131 82.5 78.0 TF16A0158 87.0 82.5
TF16A0132 101.5 97.0 TF16A0159 106.0 101.5
TF16A0133 120.5 116.0 TF16A0160 125.0 120.5
TF16A0134 83.0 78.5 TF16A0161 87.5 83.0
TF16A0135 102.0 97.5 TF16A0162 106.5 102.0

Menu

Get a Quick Quote

You can get a price or send us any questions to get any information you would like to know, and we will reply to you as soon as possible.

Update cookies preferences